TENT WALLS AND DOORS
Vinyl panel designed to attach to the tent and legs with straps. All walls can be installed on a cable to enable them to easily slide open or closed.
Available in solid white or clear window
Standard Zipper Doors
Vinyl doors are designed to provide entry/exit points where required.
Available in solid and clear window
Designed with a full height centered zipper with tie-backs for entry/exit or additional air flow
Hard doors provide both a more finished look and a grand entrance to your tent.
Available in double pane assembly
Steel frame in aluminum with clear window panels
Slow close feature
Equipped with crash hardware for safe exit
Marquee Ring Lights
The standard flood style up light. These lights are installed on the centre pole in the ceiling of the tent and are dimmable to provide as much or as little lighting desired.
Twinkle String Lights
These beautiful string light strands use clear mini bulbs on white wire to provide ambient low-key lighting.
Edison Bulb String Lights
These vintage style light strands use Edison style incandescent light bulbs on black cable and provide ambient low-key lighting.
Ceiling liners create a finished, elegant look to the interior of your tent.
Semi sheer white fabric
Ceiling liners hide the internal frame creating a soft and elegant look
Available in Marquee Tent 20×20 & 20×40
Available in Frame Tent 20×20, 20×40, 40X40, 40X60, 40X80
Decorative pole drapes create a finished look to your tent.
Sheer white fabric
Versatile installation with a center tieback or create a curtain back drop
Pole drapes hide the tent legs for a soft, elegant look
Forced Air Tent Heater
For use in any tent configuration requiring a consistent warm air temperature.
Single heater provides heat for up to 800 sq ft
Installed on the exterior of the tent allowing efficient use of space inside
Heat regulated by thermostat for controlled temperature
Larger spaces can use multiple units to provide adequate coverage
Fueled by propane and electricity (two 60lb propane tanks provides approximately 8 hours on full temperature, and each heater requires a dedicated 15 amp circuit)
Most efficient when tent is fully walled
80,000 BTU units available